Showing posts with label Failure to Warn. Show all posts
Showing posts with label Failure to Warn. Show all posts

Tuesday, December 13, 2022

Strict Liability Failure to Warn Claims Fail Where Plaintiffs Did Not Read Warnings


In the case of Mains v. The Sherwin-Williams Co., 5:20-CV-00112 (E.D. Pa. Nov. 10, 2022 Gallagher, J.), the Eastern District Court of Pennsylvania addressed the validity of a warning defect theory put forth by a Plaintiff in a products liability case.

This matter arose out of an incident during which the Plaintiff's deck caught on fire.  The Plaintiffs alleged that the product they used to stain their deck self-heated and caused a fire on their property.  More specifically, the Plaintiff's alleged that they placed application materials with the product left on it on the lawn next to the dect after which those items spontaneously caught fire.   

The court ruled that the Plaintiff’s warning defect theory failed as a matter of law because the Plaintiff admitted in this case that they never even read the warning label on the Defendant’s product.

The court therefore found that an unread warning could not be a cause of an injury in a products liability claim. 

The court also noted that the Plaintiff did not show any way that a “reminder warning” might have prevented the accident.

In this particular matter, the court also found that the Plaintiff’s failure to warn claim was also preempted by the Hazardous Substances Act because that Act did not require the Defendant to include a spontaneous combusting warning on the label as a principal hazard.

The court also confirmed that, in any event, the warning label on the product contained the words 'DANGER' and 'COMBUSTIBLE,' and further informed users of the product that 'rags, steel wool, other waste soaked with this product...may catch fire if impropertly discarded.'  Users were advised to discard such waste in a sealed water filled metal container.     

The court additionally noted that the Plaintiff was unable to establish any design or manufacturing defect because the Plaintiff’s lacked any expert evidence that the product, whether it was defective or not, actually caused the fire that injured them.

The court confirmed that the Plaintiff did not identify a cause and origin expert with regards to the fire in question. It was additionally held that lay opinion testimony is speculative and no substitute for expert fire causation testimony, particularly where there were possible alternative origins for the fire in this case. The court also noted that scientific knowledge about the chemical components of the product and their corresponding combustibility was beyond the understanding of a layperson and, therefore, required the testimony of an expert.

The court also found that the Plaintiff could not rely upon a malfunction theory of liability to establish an alleged manufacturing defect because the Plaintiffs did not have the expert testimony necessary to eliminate other possible causes.

The court also found that the Plaintiff’s implied warranty of merchantability claim was similar to a strict liability claim and that this implied warranty of merchantability claim failed because the Plaintiffs were not able to establish a product defect.

Anyone wishing to review a copy of this decision may click this LINK.  The Court's companion Order can be viewed HERE.


I thank Attorney James M. Beck of the Philadelphia office of the Reed Smith law firm for bringing this case to my attention.


Source of Image:  Photo by Pontius Wellgraf on www. Pexels.com.

Thursday, September 8, 2022

Federal Court Addresses Potiential Liability of Drug Manufacturer in Products Liability Case


In the case of DiCair v. Gilead Sci., Inc., No. 21-CV-5486 (E.D. Pa. July 12, 2022 Schiller, J.), the court ruled that negligent failure-to-warn and strict liability product claims against a pharmaceutical manufacturer were barred as a matter of Pennsylvania law.  As such, a Defendants’ Motion to Dismiss was granted in part and denied in part.

According to the Opinion, the Defendant designed and manufactured a prescription medication sold under the trade name of Harvoni which was used to treat Hepatitis C. 

The Plaintiff’s decedent was prescribed the medication and, after taking the medication, was diagnosed with a form of liver cancer. The Plaintiff’s decedent passed away thereafter.

The Plaintiff filed this lawsuit alleging a failure to warn and design and manufacturing defect claims under both negligence and strict liability. The Plaintiffs claimed that the decedent’s development of cancer was caused by his use of the medication.

The court dismissed the negligent failure-to-warn claim, noting that it was well-settled Pennsylvania law that pharmaceutical companies do not owe a duty to warn the public. Rather, manufacturers of medications are only required to warn prescribing doctors of the risk of the medications.  The court cited to the learned intermediary doctrine which holds that drug manufacturers are only required to direct required drug safety warnings to physicians who, in turn, are required to relay the same to patients.

However, the court declined to dismiss the Plaintiff’s negligent design and manufacturing defect theories, finding that the Plaintiff had asserted a valid cause of action that the Defendants had allegedly negligently designed and manufactured the medication.

Lastly, the court did dismiss the Plaintiff’s strict liability claims after holding that strict liability claims against prescription drug manufacturers were barred by Pennsylvania products liability law.

Anyone wishing to review a copy of this decision may click this LINK.  The Court's companion Order can be viewed HERE.


Source: “Digest of Recent Opinions.” Pennsylvania Law Weekly (Aug. 12, 2022).

Source of image:  Photo by Anna Shvets on www.pexels.com.

Friday, March 18, 2022

Federal Court Addresses Daubert Motion Relative to Expert Testimony and Motion for Summary Judgment in Products Case


In the case of DiDonato v. Black & Decker (U.S.), Inc., No. 20-CV-4425-JMY (E.D. Pa. Feb. 9, 2022 Younge, J.), the court denied a Motion for Summary Judgment and a Motion regarding the admissibility of expert testimony under Rule 702 in a products liability case.

According to the Opinion, the Plaintiff was allegedly injured while cleaning a vehicle and using a power buffer/polisher manufactured by the Defendant.  

Relative to the issues raised by the defense with respect to the Plaintiff’s expert testimony, the court found that the Plaintiff’s expert’s testimony about an alternative design was admissible under Rule 702. The court noted that the reliability analysis with respect to an expert testimony looks at the reliability of the methodology as opposed to the conclusions of the expert. To be admissible, the expert’s testimony must also assist the trier of fact in resolving a factual dispute.

The court noted that it is not essential that an expert be able to recreate the facts of the accident. The court reasoned in this case that, while the accident in this case happened quickly while the Plaintiff was allegedly distracted while using the Defendant’s power tool, those facts did not preclude the Plaintiff’s expert from opining on the issue of causation.

In another important ruling, the court noted that experts are allowed to rely upon the testimony of witnesses, even where that testimony is disputed.

The court ultimately found that, since the Plaintiff’s expert’s testimony was admissible, the Plaintiff’s risk/utility theory of a designed defect survived the Motion for Summary Judgment.  However, summary judgment was granted with respect to the Plaintiff's claims of a manufacturing defect, and with regards to the breach of express warranties and failure to warn claims.

The court additionally noted that the extent to which the Plaintiff’s alleged carelessness and alleged failure to follow instructions caused the accident was an issue for the jury to decide.

Anyone wishing to review a copy of this decision may click this LINK.  The Court's companion Order can be viewed HERE.


I send thanks to Attorney James M. Beck from the Philadelphia office of the Reed Smith law firm for bringing this case to my attention.

Source of image (not the device in question):  Photo by Khunkorn Laowisit from www.pexels.com.

Tuesday, March 1, 2022

Chief Judge Brann of Federal Middle District Court Addresses Variety of Products Liability Issues



In the case of Goodling v. Johnson & Johnson, No. 4:21-CV-00082 (M.D. Pa. Feb. 10, 2022 Brann, C.J.), the court granted in part and denied in part a Motion to Dismiss in a medical device strict liability and negligence claim reagarding pelvic mesh product.

The court found that, although the Plaintiffs’ Complaint provided comparatively little information about the medical procedure and the injuries at issue, the allegations were found to provide adequate notice of the claims and supporting facts and could not be dismissed as an alleged shotgun pleading.

Notably, Judge Brann also ruled that Pennsylvania law did not require an application of the Restatement of Torts (Second) §402A, comment k, across the board to bar strict liability claims against medical devices. 

Chief Judge Matthew W. Brann
M.D. Pa.


Judge Brann noted that Pennsylvania Superior court precedent barring such claims has been undermined by other decisions. Judge Brann felt that comment k applied to medical devices only on a case-by-case basis.

While the court found that the Plaintiff’s strict liability allegations involving a design defects and with respect to warnings were adequately pled, the court dismissed the strict liability manufacturing defect claim because there was no allegation made that the device deviated in some unique way from its intended design.

Judge Brann additionally dismissed the Plaintiff’s negligent misrepresentation and fraud claims as duplicative of the Plaintiffs’ warning claims.

The court also noted that the claim of unjust enrichment did not apply in products liability claims where the Plaintiff actually received and used the product. 

Elsewhere in his decision, Judge Brann also confirmed the rule of law that punitive damages are not to be considered a separate cause of action, but rather, an element of damages.

Anyone wishing to review a copy of this notable decision by Chief Judge Brann of the Federal Middle District Court of Pennsylvania may click this LINK.  The Court's companion Order can be viewed HERE

I send thanks to Attorney James M. Beck from the Philadelphia office of the Reed Smith law firm for bringing this case to my attention.